Mertech Switchboards Ltd
  • Home
  • About
  • Products
    • Switchboards
    • Schneider Panelboards
    • Automatic Transfer Switches
    • PFC Panels
    • ATS By-Pass Switches
    • iPDU Panels
    • Generator Control
    • Battery Charger
    • Fire Pump Panels >
      • Engine Fire Pump Panels
      • Electric Fire Pump Panels
    • Mertower
  • Contact
  • Introduction to UVA, CVA and DCA Panels
  • Brochures
  • Switchboard Design Details
  • Privacy Policy

ENGINE FIRE PUMP PANELS

Picture
DATA SHEET
Description
The Mertech Fire Pump Control Panels have been designed to offer state-of-the-art functions for the management of diesel engine pumps on fire fighting applications according to EN 12845. Built with dedicated components and extremely compact. The FP-DP panel includes the FFL700DP digital controller with a modern designed front panel with a LCD screen providing a clear and intuitive user interface.
The panel includes dual battery chargers with charging ammeters.

Features
  • Crank cycle according to EN 12845
  • Batteries monitoring
  • Advanced programmable functions for fire fighting systems
  • AC voltage monitoring
  • Possibility of setup via NFC technology and APP
  • Built-in RS485 communication
  • PLC logic integrated
Picture
Features
The controller integrates all the functions required by the EN 12845 standard regarding the diesel engine fire pump management and help the user to monitor and maintain the performance of the entire fire fighting system.
The backlit graphic LCD display 128x80 pixel ensures high visibility in low light conditions.
Inputs and outputs are programmable and the number can be increased with the I/O expansion modules, moreover they can be managed in the PLC logic integrated.
This all means an integrated solution less programming to set up the firefighting system. Within the main page, it is possible to see all the information about the engine fire pump.
Functions for the maintenance and the test of the firefighting system are available directly on the display with the possibility to receive remotely this information by the digital outputs or the Modbus communication through the built-in RS485.
The controller monitors constantly the temperature inside the pump room using the integrated or an external temperature sensor and the status of the auxiliary voltage with the single-phase AC voltage measurement input

MERTECH
Mertech manufacture a complete range of switchgear, from wall mounted dist boards all the way up to 65kA fault rated systems with busbars up to 3200 Amps. Switchboards comply with IEC 61439 part 2.
ADDRESS
Mertech Switchboards Ltd
Mertech House
39-49 Hastings Street
Luton, Beds. LU1 5BE
Tel: 01582 422622
Fax: 01582 422922
[email protected]
www.mertech.co.uk
POLICIES
Return Policy

Privacy Policy

Terms & Conditions

    Newsletter

Subscribe to Newsletter